SOFTEX INDUSTRIAL PRODUCTS PVT. LTD.
Structural Bearing Pads

Structural Bearing Pads

Send Inquiry

Structural Bearing Pads

SOFTEX Structural Bearing Pads are designed to transform the movement and rotation of bridge structure into elasticity and minimizes the secondary stress generated in bridge because of the layered rubber sheets reinforced by metal plates. These bearings are designed to accommodate vertical, longitudinal, horizontal and transverse loads / movements and rotation of the superstructure caused by thermal effect, traffic loads, structural load, wind load, seismic load etc. These bearings effectively release the stress on the bridge and have excellent rotation in all the directions and movements. The inserted metal plates restrict the rubber expansion on the sides and improve the resistance to load on the bridge as the elasticity of rubber absorbs shock well and lengthens the natural period of stress. Another advantage is the robustness and corrosion free nature of these products, ease and convenience of installation, long service life and customized size to suit the bridge design.

Bearing Pads are used extensively in bridges & flyovers by the construction companies. Also used in industrial machinery and heavy equipment applications. Elastomeric Bridge Bearings are designed and manufactured as per IRC:83 (Part II) - 1987 with the latest amendments, to meet the requirements of MoRT&H specifications for Road and Bridge Works to Section No. 2000 to clause number 2005 (Elastomeric Bearings) and to International Union of Railways Code UIC 772 R (Use of Rubber Bearings for Railway Bridges).

Neoprene/Bridge Bearings Pads which are used extensively in bridge structure and prestressed and precast concrete buildings. Also used in industrial machinery and heavy equipment applications. Elastomeric Bridge bearings are designed and manufactured as per IRC: 83(Part II)- 1987 with the latest amendments, to meet the requirements of MoRTH and H specifications for road and bridge works to section No. 2000 to clause number 2005(Elastomeric bearings) and to international union of railways code UIC772R(use of rubber bearings for railway briges), AASHTO and BS standards.

Softex Material Properties

Hardness(IRHD)

60+5

Minimum Tensile Strength(MPa)

17

Minimum Elongation at break(%)

400

Maximum compression set (%)

35(for 24 hrs@, 100+1oC)

Accelerated Ageing(70hrs@100+1oC)


Max change in hardness(IRHD)

+15

Max change in tensile strength(%)

-15

Max change in Elongation(%)

-40

Shear Modulus range(MPa)

0.80 MPa to 1.20 MPa

Minimum adhesive strength to elastomers to steel plate(KN/M)

7.0

Ozone resistane test@20% strain, 40+1oC, 96Hrs@50ppm 03 by vol

No cracking

Maximum Ash content(%)

5

Laminate

Mild steel

Polymer

Poly chloroprene

Minimum Polymer content

60%